M00002168
New product
TIA-470.122 2013 Edition, November 25, 2013 Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Analog Telephones with Speakerphones
In stock
Warning: Last items in stock!
Availability date: 09/09/2021
Description / Abstract:
This standard provides acoustic transmission performance
requirements for speakerphone equipped analog telephones intended
for connection to terminal adapters and voice gateways that provide
wideband speech using packet-based services such as Voice over
Internet Protocol (VoIP). These services are often referred to as
high definition or HD voice services. The specification range for
this standard is 100 to 8000 Hz, but for practical reasons the
actual audio bandwidth of covered devices is typically about 150 to
6800 Hz.
This standard is limited to single housing speakerphones
intended for use on a desk or table by a single user at a distance
of one half meter or closer.
The terminal adapters and voice gateways used to provide HD
voice services normally present 600 ohm impedances and are
connected to the wideband telephone with very short lengths of
cabling. If the wideband telephone is likely to be used in
applications where it may also be connected to narrowband voice
services, such as the public switched telephone network (PSTN),
that provide 900 ohm impedances and may use significant lengths of
loop (cabling), then evaluation for compliance with the latest
version of the ANSI/TIA-470.120 standard for narrowband analog
telephones with speakerphones is suggested.