AWS D14.5:2009

Requirements are presented for the design and fabrication of cyclically loaded press weldments, which includes the weld repair of new and existing components. Filler metals and weld procedure specifications are recommended for the applicable base metals that are limited to those consisting of carbon and low-alloy steels. Allowable unit stresses are provided for weld metal and base metal for various cyclically loaded joint designs. This specification does not address the fabrication or weld repair of pressure containing components such as hydraulic cylinders, air cylinders, or die cushions.
Scope : The purpose of this specification is to establish minimum acceptable requirements for weld joint design and the fabrication by welding of presses and press components, and is not intended to apply to material feed mechanisms and tooling. It shall also apply to the modification or repair by welding of new or existing presses or press components. Its intent is to promote the following: (1) High-quality construction and repair of presses; (2) Adequate initial and sustained performance of equipment; (3) Personnel and equipment safety; (4) Clear, concise fabrication practices that will be readily understood by the manufacturer, fabricator, buyer, and user;