Reduced price! View larger

AWS D14.3/D14.3M:2010

New product

AWS D14.3/D14.3M:2010

Specification for welding earthmoving and construction equipment

More details

$53.77

-57%

$125.05

More info

This specification provides standards for producing structural welds used in the manufacture and repair of earthmoving, construction, and agricultural equipment. Such equipment is defined as self-propelled, on- and off-highway machinery and associated implements. Manufacturerâ??s responsibilities are presented as they relate to the welding practices that have been proven successful within the industry in the production of weldments on this equipment. Basic dimensional weld details are defined and interpreted for application throughout the document. Provisions are made to identify base metals used in these weldments. Procedures to ensure that they are welded with compatible, identifiable welding processes and consumables are included with consideration given to factors that affect weldability.
Scope : This specification applies to all structural welds used in the manufacture and repair of earthmoving, construction, and agricultural equipment.1 It reflects the welding practices employed by manufacturers within the industry and incorporates various methods which have been proven successful by individual manufacturers. No restrictions are placed on the use of any welding process or procedure, provided the weld produced meets the qualification requirements of this specification. No attempt is made to limit or restrict the welding technology progression of earthmoving, construction, and/or agricultural equipment manufacturing and repair, nor should any such limitation be inferred. Design criteria for allowable stresses for the base and weld metal and the fatigue analysis for welded joints are not published in the specification. The user shall utilize AWS D14.4, Specification for Welded Joints in Machinery and Equipment, or appropriate engineering practices and principles for design criteria. 1.1.2 The Manufacturerâ??s adherence to this specification shall include responsibility for the following: (1) welding, as defined in 1.1.1, in accordance with this specification; (2) producing welds as designated on drawings by appropriate symbols and notes, with sufficient detail to show joint preparation compatible with applied processes; (3) providing and using written welding procedure specifications (WPSs); (4) ensuring that qualified welders are used to make welds; (5) recording and maintaining results of all welder performance and procedure qualification tests; (6) controlling use of designated base metals and consumables; (7) inspecting the welds to the requirements of this specification; (8) ensuring a safe welding environment and safe welding practice; (9) having a quality system in place. The requirements of AWS B5.17, Specification for the Qualification of Welding Fabricators may be used as a guide in establishing this quality program. Accreditation of quality systems of welding fabricators may be obtained through the AWS Certified Welding Fabricator (CWF) or equivalent programs. 1.2 Units of Measure. This specification makes use of both the U.S. Customary Units and the International System of Units (SI). The measurements may not be exact equivalents; therefore each system must be used independently of the other without combining in any way. The specification with the designation D14.3 uses U.S. Customary Units. The specification D14.3M uses SI Units. The latter are shown in appropriate columns in tables and figures or within brackets [ ] when used in the text. Detailed dimensions on figures are in inches. A separate tabular form that relates the U.S. Customary Units with SI units may be used in tables and figures. 1.3 Safety. Safety and health issues and concerns are beyond the scope of this standard, and therefore are not fully addressed herein. Safety and health information is available from other sources, including, but not limited to ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, and applicable federal, state, and local regulations. 1.4 Symbols. Welding symbols shown on drawings shall be compatible with those shown in AWS A2.4, Standard Symbols for Welding, Brazing, and Nondestructive Examination. Special conditions or deviations shall be fully explained by added notes, details, or definitions.

Author AWS American Welding Society
Editor AWS
Document type Standard
Format Paper
ICS 25.160.10 : Welding processes
53.100 : Earth-moving machinery
Number of pages 94
Cross references AWS A2.4
AWS A3.0M/A3.0
AWS A5.32/A5.32M
AWS B2.1/B2.1M
AWS D14.4/D14.4M
Weight(kg.) 0.2598
Year 2010
Country USA
Keyword AWS D14.3/D14.3M; Machinery; Earthmoving,Construction,Equipment