ASME BPVC 2023 Section II part B

Condition: New product

ASME BPVC.II.B-2023 SB-111/SB-111M
83
2.2 ASTM Standards:
B153 Test Method for Expansion Pin Test of Copper and
Copper-Alloy Pipe and Tubing
B154 Test Method for Mercurous Nitrate Test for Copper
Alloys
B170 Specification for Oxygen-Free Electrolytic Copper
Refinery Shapes
B224 Classification of Coppers
B846 Terminology for Copper and Copper Alloys
B858 Test Method for Ammonia Vapor Test for Determining
Susceptibility to Stress Corrosion Cracking in Copper
Alloys
B968/B968M Test Method for Flattening of Copper and
Copper-Alloy Pipe and Tube
E8/E8M Test Methods for Tension Testing of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to
Determine Conformance with Specifications
E53 Test Method for Determination of Copper in Unalloyed
Copper by Gravimetry
E54 Test Methods for Chemical Analysis of Special Brasses
and Bronzes Withdrawn 2002
E62 Test Methods for Chemical Analysis of Copper and
Copper Alloys Photometric Methods Withdrawn 2010
E75 Test Methods for Chemical Analysis of Copper-Nickel
and Copper-Nickel-Zinc Alloys Withdrawn 2010
E76 Test Methods for Chemical Analysis of Nickel-Copper
Alloys Withdrawn 2003
E112 Test Methods for Determining Average Grain Size
E118 Test Methods for Chemical Analysis of Copper-
Chromium Alloys Withdrawn 2010
E243 Practice for Electromagnetic Eddy Current Examination
of Copper and Copper-Alloy Tubes
E255 Practice for Sampling Copper and Copper Alloys for
the Determination of Chemical Composition
E478 Test Methods for Chemical Analysis of Copper Alloys
E527 Practice for Numbering Metals and Alloys in the
Unified Numbering System UNS
E2575 Standard Test Method for Determination of Oxygen
in Copper and Copper Alloys Withdrawn 2017
3. Terminology
3.1 Definitions:
3.1.1 For definitions of terms relating to copper and copper
alloys, refer to Terminology B846.
4. Ordering Information
4.1 Include the following specified choices when placing
orders for product under this specification, as applicable:
4.1.1 ASTM Designation and year of issue;
4.1.2 Copper or Copper Alloy UNS No. Designation see

More details

More info

Table 1;
4.1.3 Temper Section 7;
4.1.4 Dimensions, outside diameter, and wall thickness,
whether minimum or nominal Section 14;
4.1.5 How furnished tube or ferrule stock;
4.1.6 Quantitytotal weight or total length or number of
pieces of each size; and
4.1.7 Intended application.
4.2 The following options are available but may not be
included unless specified at the time of placing of the order
when required:
4.2.1 DELETED
4.2.2 Hydrostatic or pneumatic test as an alternative to eddy
current test Section 13.
4.2.3 If the cut ends of the tubes do not need to be deburred
Section 15.
4.2.4 If the product is to be subsequently welded Table 1,
Footnotes G and H.
4.2.5 Residual Stress TestAmmonia Vapor Test or Mercurous
Nitrate Test Section 12.
4.2.6 For Ammonia Vapor Test, risk level pH value if other
than 10.
4.2.7 Heat identification or traceability details.
4.2.8 DELETED
4.2.9 DELETED
4.2.10 If a subsequent thermal treatment after straightening
is required Section 7.
4.2.11 If product is purchased for agencies of the U.S.
Government see Supplementary Requirements section of this
specification for additional requirements, if required.
5. Materials and Manufacture
5.1 Materials:
5.1.1 The material of manufacture shall be a form of such
purity and soundness as to be suitable for processing into the
products prescribed herein.
5.1.2 When specified in the contract or purchase order that
heat identification or traceability is required, the purchaser
shall specify the details desired.
5.2 Manufacture:
5.2.1 The product shall be manufactured by such hotworking,
cold-working, annealing, straightening, trimming,
and other processes as to produce a uniform seamless tube in
the finished product.
5.2.2 The product shall be hot- or cold-worked to the
finished size, and subsequently annealed, when required, to
meet the temper properties specified.
6. Chemical Composition
6.1 The product shall conform to the chemical composition
requirements specified in Table 1.