FORD U-MJ005-8006

Description / Abstract: FORD U-MJ005-8006, 1995 Edition, February 1995 - ALUMINIUM-PAINT, HEAT RESISTANT UP TO 250 DEGREES C

1. SCOPE

The Material defined by this Ford Manufacturing Standard is an air drying aluminium paint with medium heat resistance. This material is only used for painting equipment inside of buildings where heat resistance up to 250° C is required. It is brush applied, without primer, directly on to grease-freelrust-free surfaces.   3. 3-1 3 .2 3.3 3.1 3.5 3.6 REQW- Binder T ~p e Shall consist of hydrocarbon resin or hydrocarbon oil t o meet the required heat resistance. Weinht Solids (FL? M BI 102-01) 45% minimum Viscosity (F'LlM BI 11141) Ready for Brushing. Rate and report. Colour Approximately White Aluminium FOE 9006 or BS Aluminium. Stability As delivered and after storage for up to three months under normal temperature conditions in the original sealed container, this material shall meet all the requirements of this standard and be suitable °or the intended application. Hard settling, skinning or gelling are not allowed. Soft settling easily dispe