Reduced price! View larger

C059 -- Experimental Studies and Energy Modeling for Evaluating Performance of Various Deep Wall Retrofits

M00008312

New product

C059 -- Experimental Studies and Energy Modeling for Evaluating Performance of Various Deep Wall Retrofits

Conference Proceeding by ASHRAE, 2022

Harshil Nagda, Member ASHRAE; Jian Zhang, Member ASHRAE; Tyler Pilet, Member ASHRAE; Chrissi Antonopoulos, Member ASHRAE; Cheryn Metzger, Member ASHRAE; Patricia Gunderson, Member ASHRAE; Travis Ashley; Sumitrra Ganguli; Andre Desjarlais, Member ASHR

More details

In stock

$6.45

-57%

$15.00

More info

Full Description

The Pacific Northwest National Laboratory, Oak Ridge National Laboratory, and the University of Minnesota conducted a three-year, multipart study on residential retrofit wall assemblies. The project, which was funded by the U.S. Department of Energy’s Building Technology Office, aimed to compare a range of residential wall retrofit systems that prioritized affordability, durability, and energy savings potential. The research team identified, constructed, tested, simulated, and analyzed the feasibility and economics of 16 wall retrofit assemblies (14 test configurations and two baseline configurations) that can be applied to the exterior side of existing walls (either with or without the existing cladding). The 16 wall assemblies were installed in an in-situ laboratory environment, to evaluate the ease of construction and study the thermal and hygrothermal performance of the walls. This paper presents the methodology used to evaluate the thermal performance of the walls and discusses the energy modeling results of the study. The results from the experiments were used to calibrate a THERM model of each wall assembly, which was then applied to a whole building using the EnergyPlus 8.6 simulation engine. A residential prototype building was used to extrapolate whole-building energy savings in each U.S. climate zone. To capture the conditions of the largest number of homes in the United States, the most frequent building characteristics (e.g., attic insulation level, window specifications, foundation insulation, etc.) were extracted from ResStock data and applied to the prototype model. Results from the energy modeling showed that the climate zones with the highest potential for retrofit savings are those which are heating-dominated (i.e., Cold and Very Cold climate designations). In these climate zones, heating and cooling energy savings due to the wall retrofits alone ranged from 21.5% to 38.2%.